These quality Supply Guy design metal stamps will make a lasting impression on your jewelry and are manufactured to the highest standard for durability and alignment. Design stamps are made from heat-treated tool steel and are rated for use on stainless steel.

Impression Size: 2mm

Quantity Included: 1 Stamp

Features: Rated for Use on Stainless Steel and on a Square Shank

Design stamps can be tricky so for best results follow these simple steps:

1. Practice on cheaper metal before using higher end metals like Sterling Silver or Gold Filled.

2. Make sure there is no padding under your bench block.

3. Make sure you are working on a stable table.

4. Use a steel faced or brass hammer which weighs at least 1-2 pounds depending on the complexity and size of the design.

5. Hit the stamp more than once, but hold it steady making sure you don't shift at all between hits.

These quality Supply Guy design metal stamps will make a lasting impression on your jewelry and are manufactured to the highest standard for durability and alignment. Design stamps are made from heat-treated tool steel and are rated for use on stainless steel.

Impression Size: 3mm

Quantity Included: 1 Stamp

Features: Rated for Use on Stainless Steel and on a Square Shank

Design stamps can be tricky so for best results follow these simple steps:

1. Practice on cheaper metal before using higher end metals like Sterling Silver or Gold Filled.

2. Make sure there is no padding under your bench block.

3. Make sure you are working on a stable table.

4. Use a steel faced or brass hammer which weighs at least 1-2 pounds depending on the complexity and size of the design.

5. Hit the stamp more than once, but hold it steady making sure you don't shift at all between hits.

Eurotool decorative stamps are made of hardened steel for decorating all types of jewelry items. Figures add value and interest to silver brass and other metals. Their usage also gives an artistic effect and enables the designer to personalize each piece. Used properly our stamps will last for years.

Impression Size: 5mm

Eurotool decorative stamps are made of hardened steel for decorating all types of jewelry items. Figures add value and interest to silver brass and other metals. Their usage also gives an artistic effect and enables the designer to personalize each piece. Used properly our stamps will last for years.

Impression Size: 5mm

Eurotool decorative stamps are made of hardened steel for decorating all types of jewelry items. Figures add value and interest to silver brass and other metals. Their usage also gives an artistic effect and enables the designer to personalize each piece. Used properly our stamps will last for years.

Impression Size: 5mm

Eurotool decorative stamps are made of hardened steel for decorating all types of jewelry items. Figures add value and interest to silver brass and other metals. Their usage also gives an artistic effect and enables the designer to personalize each piece. Used properly our stamps will last for years.

Impression Size: 5mm

These quality design metal stamps will make a lasting impression on your jewelry and are manufactured to the highest standard for durability and alignment. Designs are made from heat-treated tool steel and are rated for use on stainless steel.

Tool Shank: Square Tool

Impression Size: 3mm

Quantity Included: 1 Stamp

Features: Rated for Use on Stainless Steel

Manufactured in the USA, these metal stamps will make a lasting impression on your jewelry. These professional quality stamps are manufactured to the highest standard for durability and alignment. Designs are made from 01 tool steel and then hardened to last project after project.

Tool Size: .25 inch

Impression Size: 5mm

Quantity Included: 1 Stamp

Manufactured in the USA, these metal stamps will make a lasting impression on your jewelry. These professional quality stamps are manufactured to the highest standard for durability and alignment. Designs are made from 01 tool steel and then hardened to last project after project.

Tool Size: .25 inch

Impression Size: 5mm

Quantity Included: 1 Stamp

These quality Supply Guy design metal stamps will make a lasting impression on your jewelry and are manufactured to the highest standard for durability and alignment. Design stamps are made from heat-treated tool steel and are rated for use on stainless steel.

Impression Size: 3mm

Quantity Included: 1 Stamp

Features: Rated for Use on Stainless Steel and on a Square Shank

Design stamps can be tricky so for best results follow these simple steps:

1. Practice on cheaper metal before using higher end metals like Sterling Silver or Gold Filled.

2. Make sure there is no padding under your bench block.

3. Make sure you are working on a stable table.

4. Use a steel faced or brass hammer which weighs at least 1-2 pounds depending on the complexity and size of the design.

5. Hit the stamp more than once, but hold it steady making sure you don't shift at all between hits.

These quality Supply Guy design metal stamps will make a lasting impression on your jewelry and are manufactured to the highest standard for durability and alignment. Design stamps are made from heat-treated tool steel and are rated for use on stainless steel.

Impression Size: 1.5mm

Quantity Included: 1 Stamp

Features: Rated for Use on Stainless Steel and on a Square Shank

Design stamps can be tricky so for best results follow these simple steps:

1. Practice on cheaper metal before using higher end metals like Sterling Silver or Gold Filled.

2. Make sure there is no padding under your bench block.

3. Make sure you are working on a stable table.

4. Use a steel faced or brass hammer which weighs at least 1-2 pounds depending on the complexity and size of the design.

5. Hit the stamp more than once, but hold it steady making sure you don't shift at all between hits.

These quality Supply Guy design metal stamps will make a lasting impression on your jewelry and are manufactured to the highest standard for durability and alignment. Design stamps are made from heat-treated tool steel and are rated for use on stainless steel.

Impression Size: 1.5mm

Quantity Included: 1 Stamp

Features: Rated for Use on Stainless Steel and on a Square Shank

Design stamps can be tricky so for best results follow these simple steps:

1. Practice on cheaper metal before using higher end metals like Sterling Silver or Gold Filled.

2. Make sure there is no padding under your bench block.

3. Make sure you are working on a stable table.

4. Use a steel faced or brass hammer which weighs at least 1-2 pounds depending on the complexity and size of the design.

5. Hit the stamp more than once, but hold it steady making sure you don't shift at all between hits.

Manufactured in the USA, these metal stamps will make a lasting impression on your jewelry. These professional quality stamps are manufactured to the highest standard for durability and alignment. Designs are made from 01 tool steel and then hardened to last project after project.

Tool Size: .25 inch

Impression Size: 4mm

Quantity Included: 1 Stamp

These quality Supply Guy design metal stamps will make a lasting impression on your jewelry and are manufactured to the highest standard for durability and alignment. Design stamps are made from heat-treated tool steel and are rated for use on stainless steel.

Impression Size: 1.5mm

Quantity Included: 1 Stamp

Features: Rated for Use on Stainless Steel and on a Square Shank

Design stamps can be tricky so for best results follow these simple steps:

1. Practice on cheaper metal before using higher end metals like Sterling Silver or Gold Filled.

2. Make sure there is no padding under your bench block.

3. Make sure you are working on a stable table.

4. Use a steel faced or brass hammer which weighs at least 1-2 pounds depending on the complexity and size of the design.

5. Hit the stamp more than once, but hold it steady making sure you don't shift at all between hits.

These quality Supply Guy design metal stamps will make a lasting impression on your jewelry and are manufactured to the highest standard for durability and alignment. Design stamps are made from heat-treated tool steel and are rated for use on stainless steel.

Impression Size: 1.5mm

Quantity Included: 1 Stamp

Features: Rated for Use on Stainless Steel and on a Square Shank

Design stamps can be tricky so for best results follow these simple steps:

1. Practice on cheaper metal before using higher end metals like Sterling Silver or Gold Filled.

2. Make sure there is no padding under your bench block.

3. Make sure you are working on a stable table.

4. Use a steel faced or brass hammer which weighs at least 1-2 pounds depending on the complexity and size of the design.

5. Hit the stamp more than once, but hold it steady making sure you don't shift at all between hits.

These quality Supply Guy design metal stamps will make a lasting impression on your jewelry and are manufactured to the highest standard for durability and alignment. Design stamps are made from heat-treated tool steel and are rated for use on stainless steel.

Impression Size: 3mm

Quantity Included: 1 Stamp

Features: Rated for Use on Stainless Steel and on a Square Shank

Design stamps can be tricky so for best results follow these simple steps:

1. Practice on cheaper metal before using higher end metals like Sterling Silver or Gold Filled.

2. Make sure there is no padding under your bench block.

3. Make sure you are working on a stable table.

4. Use a steel faced or brass hammer which weighs at least 1-2 pounds depending on the complexity and size of the design.

5. Hit the stamp more than once, but hold it steady making sure you don't shift at all between hits.

These quality Supply Guy design metal stamps will make a lasting impression on your jewelry and are manufactured to the highest standard for durability and alignment. Design stamps are made from heat-treated tool steel and are rated for use on stainless steel.

Impression Size: 6mm

Quantity Included: 1 Stamp

Features: Rated for Use on Stainless Steel and on a Square Shank

Design stamps can be tricky so for best results follow these simple steps:

1. Practice on cheaper metal before using higher end metals like Sterling Silver or Gold Filled.

2. Make sure there is no padding under your bench block.

3. Make sure you are working on a stable table.

4. Use a steel faced or brass hammer which weighs at least 1-2 pounds depending on the complexity and size of the design.

5. Hit the stamp more than once, but hold it steady making sure you don't shift at all between hits.